Services & pricing

One ladder. Start where you are, climb only if you need to.

Every service is delivered remotely, from the photos, measurements and recordings you send. The consultation and the treatment plan are both credited in full against the full design, so starting small never costs you anything if your project grows into a build.

Where these numbers come from

100+
ROOMS DESIGNED
9
COUNTRIES
262
MATERIALS, EACH WITH ITS SOURCE

Most of them for the Latin music industry. The engineer behind them is José Julián Téllez García, acoustics engineer, licensed in Colombia since 2013 (COPNIA 05341-266265 ANT). Same method here, without the flight.

Step 1

Free diagnosis

$03 minutes · no sign-up · no card
What you get
  • — Reverberation time per frequency band
  • — The room modes (the notes your room resonates at)
  • — How much absorption you're missing
  • — A one-line verdict: what's wrong and how serious
  • — Your verdict in writing, on screen
What you send
  • — Length, width and height of the room
  • — What's on the floor, walls and ceiling (pick from a list)
  • — What the room is for
Step 2 · instant

Shopping list for your room

$49Credited in full toward the treatment planGenerated the moment you pay · emailed to you
What you get
  • — The exact products to buy: brand, model and store link (Home Depot, Lowe's, Amazon, ATS, GIK)
  • — How many units of each, and the dated price
  • — Two versions for the same result: do-it-yourself and finished panels
  • — Where each piece goes: panels per wall and ceiling, corner traps if your use needs them
  • — Reverberation before and after, by frequency band
Not included
  • — Drawings and speaker placement: that's the plan
  • — Bass below about 125 Hz and sound leaking to neighbors
  • — Any human review: it is calculated, not designed
Step 3 · most chosen

Live consultation

$115Credited in full toward a full designPay, then pick a slot on the calendar
What you get
  • — 60 minutes on video, one on one with José Julián Téllez García, acoustics engineer, practising under licence since 2013 (COPNIA 05341-266265 ANT)
  • — We look at your photos and diagnosis together
  • — What to fix first, and what can wait
  • — Materials and suppliers near you, with real prices
  • — A staged build plan that fits your budget
  • — You keep the recording and a written summary
Good for
  • — Deciding before you spend on materials
  • — Checking a contractor's or a store's proposal
  • — Neighbor noise: knowing if it's fixable and roughly for how much
Step 4

Remote home studio design

$400Credited in full toward a full designThe $49 shopping list comes off this price4 business days from the moment we have your measurements and photos
What you get
  • — Scale drawing: monitors, listening position and treatment
  • — Room modes and reverberation time by octave band
  • — Every panel specified, with a materials list
  • — Build order by stages, so you can do it in parts
  • — Expected result: reverberation before and after, by band
  • — One business day of written notes, and the revision comes from those
Not included
  • — Site visit or on-site measurement
  • — Structural isolation (walls, floating floors): that's Step 4
  • — Purchase or installation of materials
  • — Code-compliance report or engineer's seal

Describe any change you want in the notes box when ordering, and in writing after delivery.

Step 5

Full design with build support

$2,000$1,885 after a consultation · $1,600 after a planFirst delivery in 15 business days from your measurements and photos100% virtual · no site visit
What you get
  • — Complete acoustic design: isolation and treatment
  • — Remote measurement protocol you run with your phone, guided on video
  • — Wall, floor and ceiling build-ups with materials and thicknesses
  • — Drawings your contractor can build from
  • — Four 1-hour video calls with you and your builder, one every two weeks, at the key stages of construction
Good for
  • — A studio, podcast room or home theater built from scratch or gutted
  • — Neighbor noise that needs a new wall or ceiling, not panels
  • — A restaurant, office or church going through a renovation

Build support runs after the first delivery, at the pace of construction. If your city or your condo board needs a sealed report, that is filed by a licensed engineer in your state and is quoted separately.

How the credit worksNothing you pay is lost if your project grows into a build.

Pay $115 for a consultation and the full design costs you $1,885 instead of $2,000. Pay $400 for a treatment plan and it costs $1,600. Did both? $1,485. The consultation is not deducted from the plan. Reply to your receipt email within 90 days and we send you the discounted link.

What you send for a plan or a design
  • — Room dimensions (a tape measure is enough)
  • — Photos from each corner and of the ceiling, taken from the same height
  • — What each surface is made of
  • — Where your speakers, screen or desk are, or where you want them
  • — For a full design: a phone recording following our guided protocol

Questions people ask before ordering

Do you ever come on site?No. Everything is done from what you send us. That's why it costs a fraction of an on-site consultant and takes days instead of weeks.
Can a phone really measure a room?Above roughly 200 Hz, yes, well enough to decide. Below that we calculate from the room's geometry and tell you clearly which numbers are measured and which are modeled.
Do you sell the panels or materials?No. We recommend products you can buy from any store or online, with the data behind each one. We don't earn anything from what you buy.
How does the credit work?The consultation and the treatment plan both count in full toward the full design: pay $115 for a consultation and the full design costs $1,885; pay $400 for a plan and it costs $1,600; both, $1,485. The consultation does not come off the plan. The $49 shopping list is the exception: it comes off the plan. Reply to your receipt email within 90 days and we send you the discounted link.
What if the plan doesn't fit my case?Tell us in writing within the revision day and we adjust it. If we can't help your room from the information you can send, we say so before you pay for a plan.
Are you licensed engineers?We are acoustic consultants and designers. Our work informs your builder and, when your project requires it, your local licensed engineer or architect. No document here carries a professional engineer's seal.

Not sure which step you need? Start with the free one.

Three minutes, no sign-up. The verdict tells you whether a consultation, a plan or a full design makes sense.

Start your free diagnosis

Secure card payment through Stripe. Acoustic consulting and design; this is not an engineering service requiring state licensure. Questions before you pay? Write to acustega@gmail.com.